gmclist@list.gmcnet.org

GMC Motorhome Discussion List

View all threads

New dash underway

GC
Greg Crawford
Sat, Jul 24, 2021 12:04 AM

Here is a picture of my first trial fit after cutting out all the holes. I think it's gonna work.

[url=http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_11.jpg][url]

--
Greg Crawford
KM4ZCR
Knoxville, TN

"Ruby Sue"
1977 Royale
Rear Bath
403 Engine
American Eagle Wheels
Early Version Alex Sirum Quad bags

Here is a picture of my first trial fit after cutting out all the holes. I think it's gonna work. [url=http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_11.jpg][url] -- Greg Crawford KM4ZCR Knoxville, TN "Ruby Sue" 1977 Royale Rear Bath 403 Engine American Eagle Wheels Early Version Alex Sirum Quad bags
T
tomkatz3@comcast.net
Sat, Jul 24, 2021 11:11 AM

It is very nice and great to have everything in the dash!

Keep up the great work, I am looking forward to the final results.

Take care,
Tom K.

Tom & Oki Katzenberger,
Kingsville, Maryland,
1977 23' Birchaven, 455 C.I.D.

It is very nice and great to have everything in the dash! Keep up the great work, I am looking forward to the final results. Take care, Tom K. -- Tom & Oki Katzenberger, Kingsville, Maryland, 1977 23' Birchaven, 455 C.I.D.
TS
Todd Sullivan
Sat, Jul 24, 2021 2:27 PM

URL no works for me

Sully
Bellevue wa

On Fri, Jul 23, 2021 at 5:04 PM Greg Crawford captgregcrawford@gmail.com
wrote:

Here is a picture of my first trial fit after cutting out all the holes. I
think it's gonna work.

[url=http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_11.jpg][url]

--
Greg Crawford
KM4ZCR
Knoxville, TN

"Ruby Sue"
1977 Royale
Rear Bath
403 Engine
American Eagle Wheels
Early Version Alex Sirum Quad bags


GMCnet mailing list
Unsubscribe or Change List Options:

URL no works for me Sully Bellevue wa On Fri, Jul 23, 2021 at 5:04 PM Greg Crawford <captgregcrawford@gmail.com> wrote: > Here is a picture of my first trial fit after cutting out all the holes. I > think it's gonna work. > > > [url=http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_11.jpg][url] > > -- > Greg Crawford > KM4ZCR > Knoxville, TN > > "Ruby Sue" > 1977 Royale > Rear Bath > 403 Engine > American Eagle Wheels > Early Version Alex Sirum Quad bags > _______________________________________________ > GMCnet mailing list > Unsubscribe or Change List Options: >
MH
Mike Hamm
Sat, Jul 24, 2021 4:27 PM

more pictures

--
1977 Kingsley 455 as stock as it gets except lots of Ragusa parts

more pictures -- 1977 Kingsley 455 as stock as it gets except lots of Ragusa parts
LD
Larry Davick
Sat, Jul 24, 2021 5:27 PM

http://http://www.gmcmhphotos.com/photos/interior/p68265-dash-11.html

http://www.gmcmhphotos.com/photos/interior/p68265-dash-11.html

Does this do it?  Pix on the photosite

Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, Ca
Howell EFI + EBL + Electronic Dizzy

http://http://www.gmcmhphotos.com/photos/interior/p68265-dash-11.html <http://www.gmcmhphotos.com/photos/interior/p68265-dash-11.html> Does this do it? Pix on the photosite -- Larry Davick A Mystery Machine 1976(ish) Palm Beach Fremont, Ca Howell EFI + EBL + Electronic Dizzy
DC
D C _Mac_ Macdonald
Sat, Jul 24, 2021 5:29 PM

As I have posted several times in the past
the proper way to post URLs is to enclose
them in parentheses ( ) and hit return to
then cause underlining of the enclosed URL
to keep it all together.

D C "Mac" Macdonald
Amateur Radio K2GKK
Since 30 November '53
USAF and FAA, Retired
Member GMCMI & Classics
Oklahoma City, OK
"The Money Pit"
TZE166V101966
'76 ex-Palm Beach
k2gkk + hotmail dot com


From: Todd Sullivan sgltrac@gmail.com
Sent: Saturday, July 24, 2021 09:27
To: gmclist@list.gmcnet.org gmclist@list.gmcnet.org
Subject: [GMCnet] Re: New dash underway

URL no works for me

Sully
Bellevue wa

On Fri, Jul 23, 2021 at 5:04 PM Greg Crawford captgregcrawford@gmail.com
wrote:

Here is a picture of my first trial fit after cutting out all the holes. I
think it's gonna work.

[url=https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.gmcmhphotos.com%2Fphotos%2Fdata%2F7367%2Fmedium%2FDash_11.jpg&data=04%7C01%7C%7C1740b75c826f492f655508d94eaf3731%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637627336716522369%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=2iAqjlo0vimZjaYVx0jFxPeacgsSwN0RcbwG2O4%2BoM0%3D&reserved=0][url]

--
Greg Crawford
KM4ZCR
Knoxville, TN

"Ruby Sue"
1977 Royale
Rear Bath
403 Engine
American Eagle Wheels
Early Version Alex Sirum Quad bags


GMCnet mailing list
Unsubscribe or Change List Options:


GMCnet mailing list
Unsubscribe or Change List Options:

As I have posted several times in the past the proper way to post URLs is to enclose them in parentheses ( ) and hit return to then cause underlining of the enclosed URL to keep it all together. D C "Mac" Macdonald Amateur Radio K2GKK Since 30 November '53 USAF and FAA, Retired Member GMCMI & Classics Oklahoma City, OK "The Money Pit" TZE166V101966 '76 ex-Palm Beach k2gkk + hotmail dot com ________________________________ From: Todd Sullivan <sgltrac@gmail.com> Sent: Saturday, July 24, 2021 09:27 To: gmclist@list.gmcnet.org <gmclist@list.gmcnet.org> Subject: [GMCnet] Re: New dash underway URL no works for me Sully Bellevue wa On Fri, Jul 23, 2021 at 5:04 PM Greg Crawford <captgregcrawford@gmail.com> wrote: > Here is a picture of my first trial fit after cutting out all the holes. I > think it's gonna work. > > > [url=https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.gmcmhphotos.com%2Fphotos%2Fdata%2F7367%2Fmedium%2FDash_11.jpg&amp;data=04%7C01%7C%7C1740b75c826f492f655508d94eaf3731%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637627336716522369%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=2iAqjlo0vimZjaYVx0jFxPeacgsSwN0RcbwG2O4%2BoM0%3D&amp;reserved=0][url] > > -- > Greg Crawford > KM4ZCR > Knoxville, TN > > "Ruby Sue" > 1977 Royale > Rear Bath > 403 Engine > American Eagle Wheels > Early Version Alex Sirum Quad bags > _______________________________________________ > GMCnet mailing list > Unsubscribe or Change List Options: > _______________________________________________ GMCnet mailing list Unsubscribe or Change List Options:
TS
Todd Sullivan
Sat, Jul 24, 2021 9:18 PM

That link works.

On Sat, Jul 24, 2021 at 10:29 AM D C Mac Macdonald k2gkk@hotmail.com
wrote:

As I have posted several times in the past
the proper way to post URLs is to enclose
them in parentheses ( ) and hit return to
then cause underlining of the enclosed URL
to keep it all together.

D C "Mac" Macdonald
Amateur Radio K2GKK
Since 30 November '53
USAF and FAA, Retired
Member GMCMI & Classics
Oklahoma City, OK
"The Money Pit"
TZE166V101966
'76 ex-Palm Beach
k2gkk + hotmail dot com


From: Todd Sullivan sgltrac@gmail.com
Sent: Saturday, July 24, 2021 09:27
To: gmclist@list.gmcnet.org gmclist@list.gmcnet.org
Subject: [GMCnet] Re: New dash underway

URL no works for me

Sully
Bellevue wa

On Fri, Jul 23, 2021 at 5:04 PM Greg Crawford captgregcrawford@gmail.com
wrote:

Here is a picture of my first trial fit after cutting out all the holes.

I

think it's gonna work.

[url=

--
Greg Crawford
KM4ZCR
Knoxville, TN

"Ruby Sue"
1977 Royale
Rear Bath
403 Engine
American Eagle Wheels
Early Version Alex Sirum Quad bags


GMCnet mailing list
Unsubscribe or Change List Options:


GMCnet mailing list
Unsubscribe or Change List Options:


GMCnet mailing list
Unsubscribe or Change List Options:

That link works. On Sat, Jul 24, 2021 at 10:29 AM D C _Mac_ Macdonald <k2gkk@hotmail.com> wrote: > As I have posted several times in the past > the proper way to post URLs is to enclose > them in parentheses ( ) and hit return to > then cause underlining of the enclosed URL > to keep it all together. > > D C "Mac" Macdonald > Amateur Radio K2GKK > Since 30 November '53 > USAF and FAA, Retired > Member GMCMI & Classics > Oklahoma City, OK > "The Money Pit" > TZE166V101966 > '76 ex-Palm Beach > k2gkk + hotmail dot com > ________________________________ > From: Todd Sullivan <sgltrac@gmail.com> > Sent: Saturday, July 24, 2021 09:27 > To: gmclist@list.gmcnet.org <gmclist@list.gmcnet.org> > Subject: [GMCnet] Re: New dash underway > > URL no works for me > > Sully > Bellevue wa > > On Fri, Jul 23, 2021 at 5:04 PM Greg Crawford <captgregcrawford@gmail.com> > wrote: > > > Here is a picture of my first trial fit after cutting out all the holes. > I > > think it's gonna work. > > > > > > [url= > https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.gmcmhphotos.com%2Fphotos%2Fdata%2F7367%2Fmedium%2FDash_11.jpg&amp;data=04%7C01%7C%7C1740b75c826f492f655508d94eaf3731%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637627336716522369%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=2iAqjlo0vimZjaYVx0jFxPeacgsSwN0RcbwG2O4%2BoM0%3D&amp;reserved=0][url > ] > > > > -- > > Greg Crawford > > KM4ZCR > > Knoxville, TN > > > > "Ruby Sue" > > 1977 Royale > > Rear Bath > > 403 Engine > > American Eagle Wheels > > Early Version Alex Sirum Quad bags > > _______________________________________________ > > GMCnet mailing list > > Unsubscribe or Change List Options: > > > _______________________________________________ > GMCnet mailing list > Unsubscribe or Change List Options: > _______________________________________________ > GMCnet mailing list > Unsubscribe or Change List Options: >
GC
Greg Crawford
Sun, Jul 25, 2021 12:31 AM

That is .125" aluminum. It is screwed to a 1 x 1 x 14 gauge steel tubing framework behind it. The top cover for the dash will be foam/fiberglass with
vinyl padding over it. I am completely redoing the air conditioning ducting once it leaves the airbox as well as using late model Jeep a/c controls.
The aluminum dash will be overlayed with a faux carbon fiber vinyl wrap product once fabrication is complete. Here is another picture with some of the
gauges mocked up in it. The factory gauges are held in with fabricated aluminum semi circular clamps on the reverse side. I have to order my Autometer
gauges to fill in most of the holes. I already have my double din touch screen stereo with Bluetooth and back up camera, which will be switchable so
that I can turn it on whenever I wish.  The smaller rectangular opening on the right is for the A/C control panel. The rectangular plastic pieces on
each side of the column hole are for Carling switches that I got from Rocker Switch Pros. You can have the switch actuators custom engraved with
anything you wish. Depending upon the switch body you select, they will have independent lights that light up the writing at the top of the switch,
for example, when the coach's lights are on, and dependent lights that will light up the bottom of the switch when the switch is in the on position.

([url=http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_21.jpg][url])

([url=http://www.gmcmhphotos.com/photos/data/7367/medium/Switch_Actuators.jpg][url])

Greg Crawford
KM4ZCR
Knoxville, TN

"Ruby Sue"
1977 Royale
Rear Bath
403 Engine
American Eagle Wheels
Early Version Alex Sirum Quad bags

That is .125" aluminum. It is screwed to a 1 x 1 x 14 gauge steel tubing framework behind it. The top cover for the dash will be foam/fiberglass with vinyl padding over it. I am completely redoing the air conditioning ducting once it leaves the airbox as well as using late model Jeep a/c controls. The aluminum dash will be overlayed with a faux carbon fiber vinyl wrap product once fabrication is complete. Here is another picture with some of the gauges mocked up in it. The factory gauges are held in with fabricated aluminum semi circular clamps on the reverse side. I have to order my Autometer gauges to fill in most of the holes. I already have my double din touch screen stereo with Bluetooth and back up camera, which will be switchable so that I can turn it on whenever I wish. The smaller rectangular opening on the right is for the A/C control panel. The rectangular plastic pieces on each side of the column hole are for Carling switches that I got from Rocker Switch Pros. You can have the switch actuators custom engraved with anything you wish. Depending upon the switch body you select, they will have independent lights that light up the writing at the top of the switch, for example, when the coach's lights are on, and dependent lights that will light up the bottom of the switch when the switch is in the on position. ([url=http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_21.jpg][url]) ([url=http://www.gmcmhphotos.com/photos/data/7367/medium/Switch_Actuators.jpg][url]) -- Greg Crawford KM4ZCR Knoxville, TN "Ruby Sue" 1977 Royale Rear Bath 403 Engine American Eagle Wheels Early Version Alex Sirum Quad bags
WS
w schurman
Sun, Jul 25, 2021 6:18 PM

This link doesn't work for mr

On Sat, Jul 24, 2021 at 6:31 PM Greg Crawford captgregcrawford@gmail.com
wrote:

That is .125" aluminum. It is screwed to a 1 x 1 x 14 gauge steel tubing
framework behind it. The top cover for the dash will be foam/fiberglass with
vinyl padding over it. I am completely redoing the air conditioning
ducting once it leaves the airbox as well as using late model Jeep a/c
controls.
The aluminum dash will be overlayed with a faux carbon fiber vinyl wrap
product once fabrication is complete. Here is another picture with some of
the
gauges mocked up in it. The factory gauges are held in with fabricated
aluminum semi circular clamps on the reverse side. I have to order my
Autometer
gauges to fill in most of the holes. I already have my double din touch
screen stereo with Bluetooth and back up camera, which will be switchable so
that I can turn it on whenever I wish.  The smaller rectangular opening on
the right is for the A/C control panel. The rectangular plastic pieces on
each side of the column hole are for Carling switches that I got from
Rocker Switch Pros. You can have the switch actuators custom engraved with
anything you wish. Depending upon the switch body you select, they will
have independent lights that light up the writing at the top of the switch,
for example, when the coach's lights are on, and dependent lights that
will light up the bottom of the switch when the switch is in the on
position.

([url=http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_21.jpg][url
])

([url=
http://www.gmcmhphotos.com/photos/data/7367/medium/Switch_Actuators.jpg][url
])

Greg Crawford
KM4ZCR
Knoxville, TN

"Ruby Sue"
1977 Royale
Rear Bath
403 Engine
American Eagle Wheels
Early Version Alex Sirum Quad bags


GMCnet mailing list
Unsubscribe or Change List Options:

--
William S. Schurman
box 772806
Steamboat Springs, CO
80477
1978 Palm Beach
TZE168V100258

This link doesn't work for mr On Sat, Jul 24, 2021 at 6:31 PM Greg Crawford <captgregcrawford@gmail.com> wrote: > That is .125" aluminum. It is screwed to a 1 x 1 x 14 gauge steel tubing > framework behind it. The top cover for the dash will be foam/fiberglass with > vinyl padding over it. I am completely redoing the air conditioning > ducting once it leaves the airbox as well as using late model Jeep a/c > controls. > The aluminum dash will be overlayed with a faux carbon fiber vinyl wrap > product once fabrication is complete. Here is another picture with some of > the > gauges mocked up in it. The factory gauges are held in with fabricated > aluminum semi circular clamps on the reverse side. I have to order my > Autometer > gauges to fill in most of the holes. I already have my double din touch > screen stereo with Bluetooth and back up camera, which will be switchable so > that I can turn it on whenever I wish. The smaller rectangular opening on > the right is for the A/C control panel. The rectangular plastic pieces on > each side of the column hole are for Carling switches that I got from > Rocker Switch Pros. You can have the switch actuators custom engraved with > anything you wish. Depending upon the switch body you select, they will > have independent lights that light up the writing at the top of the switch, > for example, when the coach's lights are on, and dependent lights that > will light up the bottom of the switch when the switch is in the on > position. > > > ([url=http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_21.jpg][url > ]) > > ([url= > http://www.gmcmhphotos.com/photos/data/7367/medium/Switch_Actuators.jpg][url > ]) > -- > Greg Crawford > KM4ZCR > Knoxville, TN > > "Ruby Sue" > 1977 Royale > Rear Bath > 403 Engine > American Eagle Wheels > Early Version Alex Sirum Quad bags > _______________________________________________ > GMCnet mailing list > Unsubscribe or Change List Options: > -- William S. Schurman box 772806 Steamboat Springs, CO 80477 1978 Palm Beach TZE168V100258
JK
Jim Kanomata
Sun, Jul 25, 2021 7:05 PM

Me neither

On Sun, Jul 25, 2021 at 11:18 AM w schurman wschurman09@gmail.com wrote:

This link doesn't work for mr

On Sat, Jul 24, 2021 at 6:31 PM Greg Crawford captgregcrawford@gmail.com
wrote:

That is .125" aluminum. It is screwed to a 1 x 1 x 14 gauge steel tubing
framework behind it. The top cover for the dash will be foam/fiberglass

with

vinyl padding over it. I am completely redoing the air conditioning
ducting once it leaves the airbox as well as using late model Jeep a/c
controls.
The aluminum dash will be overlayed with a faux carbon fiber vinyl wrap
product once fabrication is complete. Here is another picture with some

of

the
gauges mocked up in it. The factory gauges are held in with fabricated
aluminum semi circular clamps on the reverse side. I have to order my
Autometer
gauges to fill in most of the holes. I already have my double din touch
screen stereo with Bluetooth and back up camera, which will be

switchable so

that I can turn it on whenever I wish.  The smaller rectangular opening

on

the right is for the A/C control panel. The rectangular plastic pieces on
each side of the column hole are for Carling switches that I got from
Rocker Switch Pros. You can have the switch actuators custom engraved

with

anything you wish. Depending upon the switch body you select, they will
have independent lights that light up the writing at the top of the

switch,

for example, when the coach's lights are on, and dependent lights that
will light up the bottom of the switch when the switch is in the on
position.

([url=

])

([url=

])

Greg Crawford
KM4ZCR
Knoxville, TN

"Ruby Sue"
1977 Royale
Rear Bath
403 Engine
American Eagle Wheels
Early Version Alex Sirum Quad bags


GMCnet mailing list
Unsubscribe or Change List Options:

--
William S. Schurman
box 772806
Steamboat Springs, CO
80477
1978 Palm Beach
TZE168V100258


GMCnet mailing list
Unsubscribe or Change List Options:

--
Jim Kanomata ASE
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502

Me neither On Sun, Jul 25, 2021 at 11:18 AM w schurman <wschurman09@gmail.com> wrote: > This link doesn't work for mr > > On Sat, Jul 24, 2021 at 6:31 PM Greg Crawford <captgregcrawford@gmail.com> > wrote: > > > That is .125" aluminum. It is screwed to a 1 x 1 x 14 gauge steel tubing > > framework behind it. The top cover for the dash will be foam/fiberglass > with > > vinyl padding over it. I am completely redoing the air conditioning > > ducting once it leaves the airbox as well as using late model Jeep a/c > > controls. > > The aluminum dash will be overlayed with a faux carbon fiber vinyl wrap > > product once fabrication is complete. Here is another picture with some > of > > the > > gauges mocked up in it. The factory gauges are held in with fabricated > > aluminum semi circular clamps on the reverse side. I have to order my > > Autometer > > gauges to fill in most of the holes. I already have my double din touch > > screen stereo with Bluetooth and back up camera, which will be > switchable so > > that I can turn it on whenever I wish. The smaller rectangular opening > on > > the right is for the A/C control panel. The rectangular plastic pieces on > > each side of the column hole are for Carling switches that I got from > > Rocker Switch Pros. You can have the switch actuators custom engraved > with > > anything you wish. Depending upon the switch body you select, they will > > have independent lights that light up the writing at the top of the > switch, > > for example, when the coach's lights are on, and dependent lights that > > will light up the bottom of the switch when the switch is in the on > > position. > > > > > > ([url= > http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_21.jpg][url > > ]) > > > > ([url= > > > http://www.gmcmhphotos.com/photos/data/7367/medium/Switch_Actuators.jpg][url > > ]) > > -- > > Greg Crawford > > KM4ZCR > > Knoxville, TN > > > > "Ruby Sue" > > 1977 Royale > > Rear Bath > > 403 Engine > > American Eagle Wheels > > Early Version Alex Sirum Quad bags > > _______________________________________________ > > GMCnet mailing list > > Unsubscribe or Change List Options: > > > > > -- > William S. Schurman > box 772806 > Steamboat Springs, CO > 80477 > 1978 Palm Beach > TZE168V100258 > _______________________________________________ > GMCnet mailing list > Unsubscribe or Change List Options: > -- Jim Kanomata ASE Applied/GMC, Newark,CA jimk@appliedairfilters.com http://www.gmcrvparts.com 1-800-752-7502