gmclist@list.gmcnet.org

GMC Motorhome Discussion List

View all threads

Rear License Plate Light Assembly

VP
Virgil Pearce
Sat, Sep 11, 2021 6:01 PM

Todd is tracing down a short while installing a Furrion rear and side cameras with lights and the rear license plate light assembly is corroded - so maybe the same for the front.

Do any of you have a rear license plate assembly that is in sort of good shape? Same for the front.

We are also replacing the older clearance lights with LED clearance lights. So all lights are now LED.

1976 Birchaven (The Aluminum Falcon) should be flying by Oct.

Virgil

Todd is tracing down a short while installing a Furrion rear and side cameras with lights and the rear license plate light assembly is corroded - so maybe the same for the front. Do any of you have a rear license plate assembly that is in sort of good shape? Same for the front. We are also replacing the older clearance lights with LED clearance lights. So all lights are now LED. 1976 Birchaven (The Aluminum Falcon) should be flying by Oct. Virgil
JR
John R. Lebetski
Sat, Sep 11, 2021 6:50 PM

For rear light you can cut sheet metal in that boomerang shape and install a trailer plate light in it such as from etrailer.  This is what Cinnabar
does.

John Lebetski
Woodstock, IL
77 Eleganza II

For rear light you can cut sheet metal in that boomerang shape and install a trailer plate light in it such as from etrailer. This is what Cinnabar does. -- John Lebetski Woodstock, IL 77 Eleganza II
6
6cuda6@gmail.com
Mon, Sep 13, 2021 7:31 PM

I managed to source a nice used one off Ebay but if i had to do it again i would just do as John said.

Rich Mondor,

Brockville, ON

77 Hughes 2600

I managed to source a nice used one off Ebay but if i had to do it again i would just do as John said. -- Rich Mondor, Brockville, ON 77 Hughes 2600